• Home

• Modules

• Module 1

• Learning objectives
• Overview
• Unit 1
  
• Unit 2
• Unit 3
• Unit 4
  

• Module 2
• Module 3

• Survey
  

Challenge

Re-open patient-case "8 Phantom for comparison", Case 2 from the archive to load the default plan.
Change the linac machine to 6MV VJC in both plans.

In Plan 2, try to obtain a dose distribution that resembles a wedge with an angle of 45°, assume only the 60° wedge is available!

Hint: Use two beams (same settings, one with 60º wedge, one without). Use the point dose panel.

For reference, add a 45° wedge to the beam in Plan 1 and compare!

• Prism Radiation Treatment Planning Project
  
  
• Start prism remotely
  

• General Control
  Functions in Prism

• Coordinate Conventions in Prism

• Prism panels
  

• Tips and tricks

• Prism User's
  Reference Manual

• Further Reading